Comtrol ES8510-XT - Manual (Page 67)

RocketLinx ES8510 and ES8510-XT User Guide: 2000513 Rev. H Port Status - 67
Configuration Using the Web Interface
Port Status
The Port Status page displays the current port status, including Small Form Factory (SFP) fiber transceiver
with Digital Diagnostic Monitoring (DDM) function that provides real time information of SFP transceiver
and allows you to diagnostic the optical fiber signal received and launched.
Note: Most of the SFP transceivers provide vendor information that allows the ES8510 to read it. The web
interface can display vendor name, wave length, and distance of all Comtrol SFP transceiver models. If
you see Unknown info, it may mean that the vendor does not provide their information or that the
information of their transceiver cannot be read. If the plugged DDM SFP transceiver is not certified by
Comtrol, the DDM function is not supported, but the communication is not disabled.
Port Status Page
Type
100BASE-TX displays for Fast Ethernet copper ports
100BASE-FX displays for 100BASE-FX Fiber ports
1000BASE-TX displays for Gigabit Ethernet Copper ports
1000BASE-X displays for Gigabit Fiber Ports
Link Shows link status; Up means the link is up and Down means that the link is down.
State
Shows the port state. If the state is enabled it displays Enable. If the port is disabled or
shutdown, it displays Disable.
Speed/Duplex Current working status of the port.
Flow Control The state of the flow control.
SFP Vendor Vendor name of the SFP transceiver that is plugged into the SFP port or ports.
Wavelength The wave length of the SFP transceiver that is plugged into the SFP port or ports.
Distance The distance of the SFP transceiver that is plugged into the SFP port or ports.
Temperature
Displays the current temperature detected and acceptable temperature range for the DDM
SFP transceiver.
Tx Power
(dBm) Displays the current transmit power detected and acceptable Tx power range for the DDM
SFP transceiver.
Rx Power
(dBm) Displays the current received power and acceptable Rx power range for the DDM SFP
transceiver.
Scan All Click the Scan All button to scan for all SFPs.
Eject All You can eject one or all of the DDM SFP transceivers. To eject all of the SFPs, click Eject All.