Comtrol AT Command Set Rev A User Manual
Page 113
Advertising
AT Commands Reference Manual
100722B
Conexant
3-87
@M - Initial Cellular Power Level Setting
This command is included for compatibility only and has no effect other than returning a
result code.
Syntax
@M<value>
Defined Values
<value>
Decimal number corresponding to the selected power setting.
0
@M0 command.
.
.
30
@M30 command.
Result Codes
OK
0 to 30.
ERROR
Otherwise.
:E - Compromise Equalizer Enable Command
This command is included for compatibility only and has no effect other than returning a
result code.
Syntax
:E<value>
Defined Values
<value>
Decimal number corresponding to the selected option.
0
:E0 command.
1
:E1 command.
Result Codes
OK
0 or 1.
ERROR
Otherwise.
Advertising