Comtrol AT Command Set Rev A User Manual
Page 220
Advertising
AT Commands Reference Manual
Conexant
100722B
6-22
6.2.3
Speakerphone Commands
+VSP - Speakerphone ON/OFF
This command turns the speakerphone ON or OFF
Syntax
+VSP=<mode>
Defined Values
<mode>
Decimal number corresponding to the selected option.
0
The speakerphone function is OFF. (Default.)
1
The speakerphone function is ON.
Reporting Current or Selected Values
Command: +VSP?
Response:
<mode>
Example:
0
For the default setting.
Reporting Supported Range of Parameter Values
Command: +VSP=?
Response:
(<mode> range)
Example:
(0,1)
Result Codes
OK
<mode> = 0 or 1.
ERROR
Otherwise, or if not in Voice Mode.
Advertising