Comtrol AT Command Set Rev A User Manual
Page 208
Advertising
AT Commands Reference Manual
Conexant
100722B
6-10
+VIT - Voice Inactivity Timer (DTE/Modem)
This command sets the modem’s initial value for the DTE/modem inactivity timer.
Syntax
+VIT=<timer>
Defined Values
<timer>
Decimal number corresponding to the time in units of 1.0
second. A value of 0 disables the timer.
Reporting Current or Selected Values
Command: +VIT?
Response:
<timer>
Example:
0
For the default setting.
Reporting Supported Range of Parameter Values
Command: +VIT=?
Response:
<timer> range
Example:
0-255
Result Codes
OK
<timer> = 0-255.
ERROR
Otherwise, or if not in Voice Mode.
Advertising