Comtrol AT Command Set Rev A - Manual (Page 146)

AT Commands Reference Manual
Conexant 100722B
3-120
Table 3-16. Result Code Definitions (Continued)
Code Message Meaning
23 CONNECT
1200TX/75RX The modem has established a V.23 answer connection and line speed reporting is enabled.
24 DELAYED For X4, sent when a call fails to connect and the number dialed is considered 'delayed' due to
country blacklisting requirements.
32 BLACKLISTED For X4, sent when a call fails to connect and the number dialed is considered 'blacklisted'.
33 FAX A fax modem connection is established in a facsimile mode.
35 DATA A data modem connection is established in a facsimile mode.
40 +MRR: 300 The modem has connected to the line at 300 bps and carrier reporting is enabled. (See S95
and Xn.)
44 +MRR: 1200/75 The V.23 backward channel carrier is detected and carrier reporting is enabled. (See S95 and
Xn.)
45 +MRR: 75/1200 The V.23 forward channel carrier is detected and carrier reporting is enabled. (See S95 and
Xn.)
46 +MRR: 1200 The modem has connected to the line at 1200 bps and carrier reporting is enabled. (See S95
and Xn.)
47 +MRR: 2400 The modem has connected to the line at 2400 bps and carrier reporting is enabled. (See S95
and Xn.)
48 +MRR: 4800 The modem has connected to the line at 4800 bps and carrier reporting is enabled. (See S95
and Xn.)
49 +MRR: 7200 The modem has connected to the line at 7200 bps and carrier reporting is enabled. (See S95
and Xn.)
50 +MRR: 9600 The modem has connected to the line at 9600 bps and carrier reporting is enabled. (See S95
and Xn.)
51 +MRR: 12000 The modem has connected to the line at 12000 bps and carrier reporting is enabled. (See S95
and Xn.)
52 +MRR: 14400 The modem has connected to the line at 14400 bps and carrier reporting is enabled. (See S95
and Xn.)
53 +MRR: 16800 The modem has connected to the line at 16800 bps and carrier reporting is enabled. (See S95
and Xn.)
54 +MRR: 19200 The modem has connected to the line at 19200 bps and carrier reporting is enabled. (See S95
and Xn.)
55 +MRR: 21600 The modem has connected to the line at 21600 bps and carrier reporting is enabled. (See S95
and Xn.)
56 +MRR: 24000 The modem has connected to the line at 24000 bps and carrier reporting is enabled. (See S95
and Xn.)
57 +MRR: 26400 The modem has connected to the line at 26400 bps and carrier reporting is enabled. (See S95
and Xn.)
58 +MRR: 28800 The modem has connected to the line at 28800 bps and carrier reporting is enabled. (See S95
and Xn.)
59 CONNECT 16800 The modem has connected to the line, the DTE speed is 16800 bps and DTE speed reporting
is enabled.
61 CONNECT 21600 The modem has connected to the line, the DTE speed is 21600 bps and DTE speed reporting
is enabled.
62 CONNECT 24000 The modem has connected to the line, the DTE speed is 24000 bps and DTE speed reporting
is enabled.
63 CONNECT 26400 The modem has connected to the line, the DTE speed is 26400 bps and DTE speed reporting
is enabled.
64 CONNECT 28800 The modem has connected to the line and either the line speed is 28800 bps and DCE speed
reporting is enabled, or the DTE speed is 28800 bps and DTE speed reporting is enabled.
66 +DR: ALT The modem has connected to the line in MNP Class 5 and +DR: message reporting is enabled.
(See S95, Wn, and Xn.)
67 +DR: V.42B The modem has connected to the line in V.42 bis and +DR: message reporting is enabled.
(See S95, Wn, and Xn.)
69 +DR: NONE The modem has connected to the line without data compression and +DR: message reporting
is enabled. (See S95, Wn, and Xn.)