Select finish, Select close, Select no, and shutdown and reboot the ats-nte – Comtrol DM ATS-NTe User Manual
Page 27
Advertising
PC104 RocketPort Option
27
Using the Modem Manufacturer’s Driver
6.
Select the COM port number that corresponds to the port number. This
example shows connecting a modem to the P0 connector (with the COM4 as
the starting COM port number).
7.
Select Finish.
8.
Select Close.
9.
Select No, and shutdown and reboot the
ATS-NTE.
10. After rebooting the system, open the
Network control panel, select the Services
tab, highlight Remote Access Service, and
select Properties.
Advertising