Reconfiguring aux a as a standard serial port, Using the aux a port as a com port, Select yes to stop the remote access service – Comtrol DM ATS-NTe User Manual
Page 48: Using the, Aux a port as a com port
Advertising
Reconfiguring AUX A as a Standard Serial Port
48
Reconfiguring AUX A as a Standard
Serial Port
This section contains information to change the default function of the AUX A
from the default configuration to standard RS-232 serial ports.
By default, AUX A (COM2) is configured for use with RAS and NetMeeting.
Using the AUX A Port as a COM Port
The AUX A port is pre-configured for a modem. You can use the AUX A port as a
standard RS-232 COM port if you perform you disable the RAS service.
1.
Select Start/Administrative Tools Common/Remote Access Admin.
2.
Select Stop Remote Access Service from the Server menu.
3.
Select Yes to stop the Remote Access Service.
AUX A is now a standard COM port on the ATS-NTE.
Advertising