Comtrol DM ATS-NTe - Manual (Page 67)

Appendix D. Changing BIOS Configuration 67
Appendix D. Changing BIOS
Configuration
This section discusses using the BIOS to change the system defaults. The
DeviceMaster ATS-NTE uses the AWARD PCI/ISA BIOS for system
configuration. The AWARD BIOS setup program is designed to provide maximum
flexibility in configuring the system by offering various options which may be
selected to meet your requirements.
Note: The information in this appendix is for reference only. The DeviceMaster
ATS-NTE is pre-configured before shipment.
Getting Started
When you apply power on the DeviceMaster ATS-NTE, the BIOS enters Power-on-
-Self Test (POST) routines. These routines are executed for system test,
initialization, and system configuration verification. After the POST routines are
completed, the following message appears:
" Hit DEL if you want to run SETUP"
To access the AWARD BIOS SETUP UTILITY, press the <Del> key. This screen
displays.