Comtrol DM ATS-NTe - Manual (Page 46)

Certified PCMCIA Adapters 46
Xircom RealPort Modem 56 GlobalACCESS Adapter
Xircom RealPort Modem 56 GlobalACCESS Adapter
Although, the RealPort Modem 56 GlobalACCESS driver for this adapter is pre-
configured into the ATS-NTE as COM3, you must configure the modem in RAS
and you may need to select a country code if you are using it outside North
America.
To set up RAS, see Configuring RAS TCP/IP for Dialin on Page 11.
The following subsections discuss these topics:
• How to install the Xircom Utilities (modem documentation, diagnostic, and
CountrySelect).
• How to set the country code if outside of the United States or Canada, after
installing the Xircom Utilities.
For support of the RealPort modem, see http://www.intel.com/network/
connectivity/products/xirrm56g.htm .
Installing Xircom
Utilities Use the following procedure to install the Xircom Utilities on the ATS-NTE.
1. Place the Xircom CD (Version 2.62) in a shared CD-ROM drive on the network.
2. Browse the CD and execute the Setup.exe file.
3. Select Install Software and Tools.