Using the console port as a com port, Open the services control panel, Change the startup type to disabled and select ok – Comtrol DM ATS-NTe User Manual
Page 50: Select the close button in the services popup
Advertising
Using the CONSOLE Port
50
Using the CONSOLE Port as a COM Port
Using the CONSOLE Port as a COM Port
The CONSOLE port is pre-configured for use with the Console Management
system. The following shows how to disable CONSOLE mode and use the port as a
standard RS-232 COM port.
1.
Open the Services Control panel.
2.
Highlight the cmdrmt entry in the Services popup and select the Startup
button.
3.
Change the Startup type to Disabled and select Ok.
4.
Select the Close button in the Services popup.
Advertising