Default operating system configuration, System – Comtrol DM ATS-NTe User Manual

Page 60

Advertising
background image

Appendix B. Specifications and Notices

60

Default Operating System Configuration

AWARD 256 Kb flash memory BIOS

Display controller that has a MediaGx processor with 4 MB memory that
supports non-interlaced CRT monitors resolutions up to 1280 x 1024 @ 256
colors or 1024 x 768 @ 16 bpp.

10/100M bps Ethernet Controller, with two Realtek

RTL8139 IEEE802.u

100 BASE-TX standard dual auto-sensing interface to 10 Mbps or 100 Mbps
networks. On board RJ45 connectors provide for easy connection.

Serial ports on the motherboard.

-

AUX A (COM2) is pre-configured RAS and NetMeeting for remote
management through a modem. See

Setting Up Remote Management

on

Page 11 for the default set up. See

Using the AUX A Port as a COM Port

on Page 48, if you want to disable the default configuration.

-

CONSOLE (COM1) is for serial console administration. See

. Using the

CONSOLE Port

on Page 49, for information.

Parallel port (DB25), which supports SPP/EPP/ECP mode.

Note: The default printer configuration supports the Epson

FX80. If you

require a special driver for your printer contact Comtrol.

PS/2 mouse connector (6-pin mini DIN) connector.

PS/2 keyboard connector (6-pin mini DIN) connector.

Optional PC104 serial ports with a quadcable or octacable interface that is
software configurable with speeds up to 230.4 Kbps.

Optional PCMCIA slot for Comtrol approved devices that are pre-configured in
the ATS-NTE system.

Note: The ATS-NTE PCMCIA option supports two Type II PCMCIA slots or

one Type III slot, which is installed at the factory. Drivers for Comtrol
approved PCMCIA devices are installed in the system.

-

Xircom CreditCard Wireless Ethernet Adapter

on Page 41

-

Xircom RealPort Modem 56 GlobalACCESS Adapter

on Page 46

The hardware supports the following items, but they are not supported by the
Windows NT Embedded operating system:

USB interface

Power management

Watch-Dog Timer

Default Operating
System
Configuration

The following list is a baseline operating system configuration for the ATS-NTE.
For information about the operating system, see Windows NT Embedded on the
Microsoft web site at:

http://www.microsoft.com/windows/embedded/nt/

default.asp

.

System

Platform

System Role: Workstation System
Core OS: Standard OS
HAL: Standard HAL
Virtual Memory: No Page File
Error Recovery: System Message Interception

Devices

Storage

Floppy Disk: Standard Floppy Disk
Fixed Disk

CompactFlash IDE disk
EIDE Disk
SCSI Disk

Advertising