Comtrol DM ATS-NTe - Manual (Page 5)

Installation and Setup 5
Installation and Setup
This section discusses the following topics:
• Product overview.
• Installing the hardware.
• Configuring the network settings on the ATS-NTE.
• Changing the default computer and workgroup names, for multiple unit
installations.
• Configuring dialin on the ATS-NTE for NetMeeting.
• Setting up remote management.
Please refer to the End-User License Agreement for Microsoft
®
Windows
®
NT
Embedded shipped with the ATS-NTE for licensing information.
Product Overview
The DeviceMaster ATS-NTE is a standalone, user programmable microcomputer
designed to run both existing and newly developed Microsoft Windows
applications in a solid-state environment.
The ATS-NTE model provides built-in Ethernet connectivity and is designed for
“satellite” deployment through remote management and support of the server, its
local programs and the attached serial devices.
The DeviceMaster ATS-NTE is running Comtrol Corporation’s customized version
of the Windows NT
®
4.0 Embedded operating system. With a few small exceptions,
the Embedded NT operating system performs in a similar manner to a standard
“desktop” version of Windows NT 4.0 Workstation. See
Appendix B. Specifications
and Notices starting on Page 58 for detailed default system information.
If you are unfamiliar with using an embedded operating system, you should
review information about the operating system before installation. Please refer to
the existing documentation provided by Microsoft at
http://www.microsoft.com/
windows/embedded/xp/previous/default.asp .
Installation
Installation of the hardware may vary depending on the configuration you ordered
from Comtrol. Although the ATS-NTE can be placed in a remote location, you will
need to connect a monitor, keyboard, and mouse to configure the ATS-NTE before
it is placed into service.
USB is not supported
by Windows NT Embedded.