Comtrol DM ATS-NTe - Manual (Page 70)

Appendix D. Changing BIOS Configuration 70
PNP/PCI Configuration
PNP/PCI Configuration
This menu is used to assign IRQ numbers to your PNP/PCI devices manually. This
figure illustrates the DeviceMaster ATS-NTE factory defaults.
• PNP OS Installed: If you install a Plug and Play operating system (OS), the
OS will reassign the interrupt even if you choose Yes for this option. If you
install a non-Plug and Play OS or if you want to prevent the OS from
reassigning the board’s IRQ settings, choose No for this option.
• Resources Controlled By: Select Auto if you want the computer to assign the
IRQs.
• Reset Configuration Data: Enabling this field means you allow the
configuration data to be reset.
• IRQ-xx assigned to: These fields show whether certain IRQ is used by a PCI/
ISA card.