Comtrol DM ATS-NTe - Manual (Page 35)

PC104 RocketPort Option 35
Column Setup
* The Reset command does not clear raw data from the calcs.dat file. It simply
resets the selected display fields to their null values.
Column Setup When you select Add or Properties from
the column pop-up menu, the Column
Setup window displays:
• Use the Input drop list to select the
variable displayed in the column.
• Use the Type drop list to select the
way in which the value displays:
either as an integer, as an on/off
state, as an integer with a kilo,
mega, or giga suffix, or as an
hh:mm:ss time stamp. This defaults
to the appropriate type for the
selected Input variable.
• Use the Name variable to change
the column heading name.
• Use the Width variable to specify
the column width in characters.
• Use Color0 to set the column character color when the value is zero.
• Use Color1 to set the column character color when the value is not zero.
• When done, click OK to save your changes and return to Port Monitor.
Report
Configuration To configure reports, select
Config from the Edit menu.
The Single report options
cover all ports and are
overwritten each time the
reports are generated. The
Multiple report options
generate a separate report
for each port, and each
report file is appended each
time the report is generated.
For Hour reports, use the
Single and Multiple drop
lists to select whether you
are generating single or
multiple reports, or both.
For each report type, select
from the following types of data to include:
• None: no report is generated.
Add a column.
Right-click on the column now occupying the desired
location and select Add from the pop-up menu.
You are prompted to name the variable you want to
display, as well as other information. (See Column
Setup, below.)
After you click OK, the column is inserted in the
selected location and the existing column is moved to
the right.
Change other properties
of a column. Right-click on the column and select Properties from
the pop-up menu. (See Column Setup, below.)
Desired Change Procedure