Futaba 4PK 2.4GHz - Manual (Page 113)

114
Fu
n
c
tio
n
(Opening Screen)
MENU 1
Press t he button
Calling the setup screen
(Opening Screen)
MENU 2
DIRECT SEL
*Calling from menu screen
Press the button set
at this function.
MENU1/2 selection
by
button
Menu screen call
by
button
Select the function
by
button
Press t he button
* W h e n t h e d ire c t c all but to n
is set, the setup screen is also
called by the following method:
Adjuster "ADJST"
(Preparation)
In the steering side selected state, select the adjustment
screen by pressing the (JOG) button.
1
(Steering neutral adjustment)
In the neutral setup screen (figure at the right) state, lightly
pull the steering wheel and then press the (JOG) button in
the state in which the wheel is not being touched.
2
(Steering throw adjustment)
In the throw setup screen (figure at the right) state, lightly
turn the wheel fully to the left and right and press the (JOG)
button.
3
(Correction execution)
At the check screen, and press the (+) and (-) buttons simul-
taneously.
Steering adjustment
However, if correction was applied, it may be nec-
essary to recheck the set values of all the setup
functions.
Adjuster "ADJST"
Steering and throttle correction can be applied. Use this function when a mechanical off-
set has occurred for some reason.
s3ELECT
button
* b l i n k s a t t h e c u r r e n t
setup item.
Throttle
Steering