Futaba 4PK 2.4GHz - Manual (Page 62)

1 SPEED
A delay is set over the entire
throttle range.
2 SPEED
A delay can be set in 2 ranges
with TGP1 as the boundary.
3 SPEED
A delay can be set in 3 ranges with
TGP1 and TGP2 as the boundaries.
TGP1
high
neutral
high
neutral
high
neutral
TGP2 TGP1
ALL
LOW
HIGH
LOW
HIGH
MID
63
Fu
n
c
tio
n
(Opening Screen)
MENU 1
Press t he button
Calling the setup screen
(Opening Screen)
MENU 2
DIRECT SEL
*Calling from menu screen
Press the button set
at this function.
MENU1/2 selection
by
button
Menu screen call
by
button
Select the function
by
button
Press t he button
* W h e n t h e d ire c t c all but to n
is set, the setup screen is also
called by the following method:
s3ELECT
button
* b l i n k s a t t h e c u r r e n t
setup item.
With "THSPD": Quick start without skidding
Without "THSPD": Slow start due to skidding
-Throttle servo (amp) operation is delayed so that the drive wheels will not spin even if
the trottle trigger is operated more than necessary. This delay function is not performed
when the throttle trigger is returned and at brake operation.
-1 speed, 2 speed, or 3 speed can be selected.
Operation
Throttle Speed "THSPD"
Mode selection
One speed, 2 speed, or 3 speed can be selected at the "MODE"
item. The setting item (screen) depends on the mode. The figure at
the above is the 3 speed setup screen.
Throttle Speed "THSPD" (Throttle system)
Sudden throttle trigger operation on a slippery
road only causes the wheels to spin and the ve-
hicle cannot accelerate smoothly. Setting the
throttle speed function reduces wasteful battery
consumption while at the same time permitting
smooth, enjoyable operation.