Futaba 4PK 2.4GHz - Manual (Page 57)

Setup items
RATE
:Forward side rate
FWD-TYP :Forward side curve
selection
BRK-EXP :Brake side rate
Setup item selection
- Select by (JOG) button up or down operation.
0%
Nor
mal
+1% ~ +100%
Trigger operation
Quick
-1% ~ -100% Mild
Ser
v
o
tr
a
v
el
0%
Nor
mal
+1% ~ +100%
Trigger operation
Quick
-1% ~ -100% Mild
Ser
v
o
tr
a
v
el
58
Fu
n
c
tio
n
(Preparation)
- With the jog dial, move the blinking cursor up or down to select "FWD-
TYP".
With the plus (+) or minus (-) buttons, select EXP.
- With the jog dial, move the blinking cursor up or down to select "RATE"
and make the following preferred settings.
1
Forward Exponential Adjustment
Use the plus (+) button to adjust
for a faster throttle response or use
the minus (-) button for a slower or
milder throttle response.
- Plus (+) button- the higher the
number goes on the positive side,
the faster the response will be at
center of throttle response.
- Minus (-) button- the higher the
number goes on the negative side,
the milder or softer it is in the cen-
ter of the throttle response.
2
Brake Exponential Adjustment
With the jog dial, move the blinking
cursor up or down to select "BRK-
EXP".
Use the plus (+) button to adjust
for a faster brake response or use
the minus (-) button for a slower or
milder brake response.
- Plus (+) button- the higher the
number goes on the positive side,
the faster the response will be at
center of brake response.
- Minus (-) button- the higher the number goes on the negative side, the
milder or softer it is in the center of the brake response.
3
When ending setting, return to the initial screen by pressing the (END)
button twice (for function menu screen, press the (END) button once).
Adjustment method for EXP curve
Throttle EXP "THEXP"
Curve type Select button
- Select with the (+) or (-) but-
tons.
Adjustment range
RATE
:-100 ~ 0 ~ +100%
FWD-TYP :EXP, VTR, CRV
BRK-EXP :-100 ~ 0 ~ +100%
Adjust button
Adjust with the (+) and (-) but-
tons.
- Return to the initial value "0" by
pressing the (+) and (-) buttons
simultaneously for about 1 sec-
ond.