Futaba 4PK 2.4GHz - Manual (Page 61)

62
Fu
n
c
tio
n
TU
RN TURN
R
ET
UR
N RETU
RN
Steering Speed "STSPD"
(Preparation)
- Select the setting item "TURN" by (JOG) button up or down
operation, and make the following adjustments:
1
"TURN" direction adjustment
Use the (+) or (-) buttons to adjust the delay
amount.
2
"RETURN" direction adjustment
Select the setting item "RETURN" by (JOG)
button up or down operation, and use the (+)
or (-) buttons to adjust the delay amount.
3
When ending setting, return to the initial screen by pressing
the (END) button twice (for function menu screen, press the
(END) button once).
Steering Speed adjustment
100% 1%
Servo operation is delayed.
- Onroad TURN side: Approx. 50~80% RETURN side: Approx. 60~100%
- Offroad TURN side: Approx. 70~100% RETURN side: Approx. 80~100%
Setting example (Steering servo: S9451 / S9351) . . . (Setting criteria)
Adjust button
- Adjust with the (+) and (-) but-
tons.
- Return to the initial value "0" by
pressing the (+) and (-) buttons
simultaneously for about 1 sec-
ond.
The steering speed adujustment " TURN " and " RETURN " can be controlled with digital
dial DL1, DL2, DL3 or digital trim DT3 etc. with the function select dial function. (See
page 88)
Dial / Trim Setting
Adjustment range
1~100% (each direction)
At 100%, there is no delay.
Setup item selection
- Select by (JOG) button up or
down operation.