Futaba 4PK 2.4GHz - Manual (Page 118)

119
Fu
n
c
tio
n
(Opening Screen)
MENU 1
Press t he button
Calling the setup screen
(Opening Screen)
MENU 2
DIRECT SEL
*Calling from menu screen
Press the button set
at this function.
MENU1/2 selection
by
button
Menu screen call
by
button
Select the function
by
button
Press t he button
* W h e n t h e d ire c t c all but to n
is set, the setup screen is also
called by the following method:
s3ELECT
button
* b l i n k s a t t h e c u r r e n t
setup item.
Channel 3/4 position "CH3","CH4"
Setup Item
CH3 POSI :Channel 3 position
CH4 POSI :Channel 4 position
1
(Position adjustment)
Use the (+) and (-) buttons to adjust the channel 3 or chan-
nel 4 position.
2
When ending setting, return to the initial screen by pressing
the (END) button twice (for function menu screen, press the
(END) button once).
Channel 3/4 adjustment
Channel 3/4 position "CH3","CH4" (3rd or 4th channel system)
The channel 3/4 servo position can be set from the transmitter. When CH3 is assigned to
a dial by the dial function (p.88), this setting is linked to that dial.
When CH3/4 is not assigned to a dial, it can be set with this screen.
When CH3/4 is assigned to a switch by the switch function (p.86), you cannot adjust the
CH3/4 via the screen.
Adjustment buttons
- Use the (+) and (-) buttons to
make adjustments.
- Press the (+) and (-) buttons
simultaneously (approx. 1 sec)
to return to the initial screen
Channel 3 position (POSI)
Channel 4 position (POSI)
0~100%
Initial value: 100%