Futaba 4PK 2.4GHz - Manual (Page 27)

ｎ Warning
Antenna Moving Range
!DJUST Antenna
A B
W h e n t h e a n te n n a i s
changed, it requires the
m e t a l p a r t o f t h e a n -
tenna to be held firmly
while putting it on.
Antenna
28
B
e
for
e
Using
About The Transmission Antenna
ｊ
Otherwise, the operating range may become shorter.
ｌ The antenna position can be changed in the range as shown in figures A and B. However, please
do not apply unnecessary force or shock.
The internal cable may be damaged; thus transmitting distance decreases and it may cause malfunction.
ｌ Never hold only the antenna.
Hold the grip handle, otherwise the antenna may be damaged.
About Transmitter Antenna and Receiver
ｌ 4HE
cept when it must be replaced.
If the transmitter antenna terminals get dirty, the radio wave output will become weak and there is the danger that the
receiving range will be substantially shortened.
ｊ When the antenna is changed, it requires the metal
part of the antenna to be held firmly while putting it
on.
The antenna can not be mounted to T4PK (by rotating the middle
part of the antenna).
There might be small glitch when the antenna
of transmitter is brought close to servos, ESCs
or other peripheral devices.
This is not an issue but please keep this symp-
tom in mind especially when setting-up.