Futaba 4PK 2.4GHz - Manual (Page 117)

118
Fu
n
c
tio
n
(Opening Screen)
MENU 1
Press t he button
Calling the setup screen
(Opening Screen)
MENU 2
DIRECT SEL
*Calling from menu screen
Press the button set
at this function.
MENU1/2 selection
by
button
Menu screen call
by
button
Select the function
by
button
Press t he button
* W h e n t h e d ire c t c all but to n
is set, the setup screen is also
called by the following method:
Throttle ATL Function "ATL"
Operation
The throttle brake side (when the throttle is pushed forward)
brake amount can be adjusted.
Setup Item
RATE :Brake amount
1
(Brake amount adjustment)
Use the (+) and (-) buttons to adjust the brake amount.
Adjust the - side when the braking effect is strong and the + side when the
braking effect is weak.
2
When ending setting, return to the initial screen by pressing
the (END) button twice (for function menu screen, press the
(END) button once).
ATL function adjustment
Throttle ATL Function "ATL" (Throttle system)
This function decreases the set value when the braking effect is strong and increases the
set value when the braking effect is weak.
This function is linked to transmitter grip dial DL2. When DL2 is assigned another
function, this function can be set with this screen.
Adjustment buttons
- Use the (+) and (-) buttons to
make adjustments.
- Press the (+) and (-) buttons
simultaneously (approx. 1 sec)
to return to the initial screen
Brake amount (RATE)
0~100%
Initial value: 100%