Futaba 4PK 2.4GHz - Manual (Page 59)

Setup items
1:~5
:Curve points 1~5
C:RES :Curve reset
FWD-TYP :Forward side curve
selection
BRK-EXP :Brake side rate
Setup item selection
- Select by (JOG) button up, down, left or right operation.
60
Fu
n
c
tio
n
Throttle curve
(Preparation)
- Select "CRV" at setup item "FWD-TYP".
1
Curve setup
- Select the setting item "1:" (1st point), by (JOG) button up,
down, left, or right operation, and use the (+) and (-) buttons
to set the 1st point.
Set the throttle curve by sequentially setting "2:" (2nd point)
~ "5:" (5th point).
2
Brake side adjustment
Select the setting item "BRAKE" by (JOG) button up or down
operation. When you want to quicken the rise, use the (+)
button to adjust the + side and when you want to make the
rise milder, use the (-) button to adjust the - side.
3
When ending setting, return to the initial screen by pressing
the (END) button twice (for function menu screen, press the
(END) button once).
Adjustment method for VTR curve
Throttle EXP "THEXP"
Initial value
P1:17%
P2:33%
P3:50%
P4:67%
P5:83%
Example
P1:8%
P2:20%
P3:35%
P4:35%
P5:50%
Adjustment range
1: ~ 5 : 0 ~ 100%
F-TYP : EXP, VTR, CRV
BRAKE : -100 ~ 0 ~ +100%
Adjust buttons
Adjust with the (+) and (-) but-
tons.
- Return to the initial value by
pressing the (+) and (-) buttons
simultaneously (approx. 1 sec).
Point in current setup
A ve r t i c a l c u r s o r l i n e t h a t
shows the point in the current
setup is displayed on the setup
screen graph.
Returning entire curve to initial value
- Select setup item "C:RES" and
return the set value of each
point to the initial value by si-
multaneously pressing (approx.
1 sec) the (+) and (-) buttons.
Curve type Select button
- Select with the (+) or (-) but-
tons.
Initial value:
Point.1:17, 2:33, 3:50, 4:67, 5:83
BRK-EXP "0"
For the CRV curve, only the
high side can be set. The
b r a ke b e c o m e s t h e E X P
curve.