Futaba 4PK 2.4GHz - Manual (Page 93)

94
Fu
n
c
tio
n
Timer Function "TIMER"
(Preparation)
Select the setting item "TYPE" by (JOG) button up or down
operation. Press the (+) or (-) button and select "FUEL DOWN
TM".
1
(Alarm time setting)
Select the setting item "ALRM" by (JOG) button up, down,
left, or right operation and set
the alarm time with the (+) and
(-) buttons.
(Pre alarm time setting)
Select the setting item "PRAL"
by (JOG) button up, down, left, or right operation, and set the
pre alarm time with the (+) and (-) buttons.
2
(Timer start/stop operation)
When the switch ("LAP START") assigned by function select
switch function is pressed, the
timer starts. When the switch
("LAP START") is pressed
while the timer is operating,
the timer is reset and simulta-
neously restarted. (Restart)
- Linking only start to the throttle trigger
Select the setting item "RST" by (JOG) button up, down, left,
or right operation and press the (+) and (-) buttons simultane-
ously for about 1 second. When the set beeps and the status
display switches from "RST" to blinking "RDY", the system
enters the trigger operation ready state. When the trigger is
operated at the forward side, the timer starts. (Status display
"RUN")
3
(Timer stop and reset operation)
When the switch ("LAP RESET") assigned by function select
switch function is pressed, the
timer is stopped and reset. Se-
lect the status display ("RUN",
"STP", or "RDY") by (JOG)
button up or down operation
and press the (+) and (-) buttons simultaneously for about
1 second. The set beeps and the status display changes to
"RST" and the timer resets.
Using the fuel down timer
Adjustment buttons
- Use the (+) and (-) buttons to
make adjustments.
- Press the (+) and (-) buttons
simultaneously (approx. 1 sec)
to return to the initial screen.
Alarm time (ALRM)
OFF, 1 ~ 99 m
Initial value: 5 m
Prealarm time (PRAL)
OFF, 1 ~ 30 s
Initial value: OFF
Switches
LAP START :start / stop
LAP RESET :stop / reset
Status display
RST :Reset state
RDY :Throttle trigger operation wait
RUN :Timer running
STP :
Timer stopped
Status display
RST :Reset state
RDY :Throttle trigger operation wait
RUN :Timer running
STP :
Timer stopped