IC Realtime 4 Channel Forensic Network Video Recorder - Manual (Page 100)

91
5 WEB OPERATION
There might be slightly difference in the interface due to different series.
5.1 Network Connection
Before web operation, please check the following items:
z
Network connection is right
z NVR and PC network setup is right. Please refer to network setup(main menu->setting-
>network)
z Use order ping ***.***.***.***(* NVR IP address) to check connection is OK or not. Usually
the return TTL value should be less than 255.
z Open the IE and then input NVR IP address.
z System can automatically download latest web control and the new version can overwrite
the previous one.
z If you want to un-install the web control, please run uninstall webrec2.0.bat. Or you can go to
C:\Program Files\webrec to remove single folder. Please note, before you un-install, please
close all web pages, otherwise the un-installation might result in error.
5.2 Login
Open IE and input NVR address in the address column. For example, if your NVR IP is
10.10.3.16, then please input http:// 10.10.3.16 in IE address column. See Figure 5-1.
Figure 5-1
System pops up warning information to ask you whether install webrec.cab control or not. Please
click yes button.
If you can’t download the ActiveX file, please modify your settings as follows. See Figure 5-2.
Input your IP
address here.