IC Realtime 4 Channel Forensic Network Video Recorder - Manual (Page 101)

92
Figure 5-2
After installation, the interface is shown as below. See Figure 5-3.
Please input your user name and password.
Default factory name is admin and password is admin.
Then you can select the login mode: LAN and WAN.
Note: For security reasons, please modify your password after you first login.
Figure 5-3
After you logged in, you can see the main window. See Figure 5-6.
This main window can be divided into the following sections.
z
Section 1: there are five function buttons: configuration (chapter 5.3), search (chapter 5.4),
alarm (chapter 5.5), about (chapter 5.6), log out (chapter 5.7).
z Section 2: there are channel number and three function buttons: start dialog and local play,
refresh.