IC Realtime 4 Channel Forensic Network Video Recorder User Manual
Page 98
89
z
Current free space: Here you can set a threshold here. System can generate an alarm to
alert you once the CD free space is below you value you set here. There are four alarm
methods: buzzer/stop burning/alarm output/show message.
z
Start sync burning: You can select one or more CD to burning at the same time. System
burns the same data. System stops burning when it finishes burning. Or you can stop
manually.
z
Start tour burning: You need to select several CD to begin circle burning. System begins
burning from the first CD and then auto goes to the second CD until it finishes all CD
burning.
z
Change CD: During the CD burning process, you can click it to replace CD manually.
System pops up current CD and then you can input a new one. System begins burning
data from the previous 5 minutes of the previous CD so that there is no missing data
between these two CDs.
z
Pause: During the burning process, you can pause current burning if the court is
adjournment. Click continue button, you can begin burning again and all data is on the
same CD.
Figure 4-119
4.2.9 Shutdown
Double click shutdown button, system pops up a dialogue box for you to select. See Figure 4-120
z
Logout menu user: log out menu. You need to input password when you login the next time.
z
Restart application: reboot NVR.
z
Shutdown: system shuts down and turns off power.
z
Restart system: system begins rebooting.
z
Switch user: you can use another account to log in.