IC Realtime 4 Channel Forensic Network Video Recorder - Manual (Page 52)

43
detect. Click the motion detect button to begin play.
z Once the motion detect play has begun, click button again will terminate
current motion detect file play.
z The system will take the whole play zone as the motion detect region by
default.
z If you select to play other file in the file list, system switches to motion detect
play pf other file.
z During the motion detect play process, you can not implement operations such
as change time bar, begin backward playback or frame by frame playback. .
Important
System does not support motion detect zone setup during the full-screen
mode.
Other Functions
14
Other channel
synchronization switch to
play when playback When playing the file, click the number button, system can
switch to the same period of the corresponding channel to
play.
15 Digital zoom
When the system is in full-screen playback mode, left click
the mouse in the screen. Drag your mouse in the screen to
select a section and then left click mouse to realize digital
zoom. You can right click mouse to exit.
Note:
All the operations here (such as playback speed, channel, time and progress) have
relationship with hardware version. Some series NVRs do not support some functions or
playback speeds.
4.2.3.1 CD Playback
This function is for you to verify the real-time burning data. You can check the real-time
burning data and backup data.
In Search interface (Figure 4-39), select Play from CD from the dropdown list and then click
file list switch button (Button 5 in Figure 4-39 ). You can see an interface shown as in Figure
4-41. Here you can view file list from the CD. Double click a file name, you can playback a
file.
Figure 4-41