IC Realtime 4 Channel Forensic Network Video Recorder - Manual (Page 80)

71
z Address: input corresponding PTZ address.
z Baud rate: Select baud rate.
z Data bit: Select data bit. Default setup is 8.
z Stop bit: Select stop bit. Default setup is 1.
z Parity: There are three choices: none/odd/even. Default setup is none.
After completed all the setups please click save button, system goes back to the previous menu.
Figure 4-84
If you are connecting to network PTZ, the PTZ type shall be remote. See Figure 4-85.
Figure 4-85
In the one-window surveillance mode, right click mouse (click “fn” Button in the front panel). The
interface is shown as below: See Figure 4-86.