IC Realtime 4 Channel Forensic Network Video Recorder - Manual (Page 43)

34
Figure 4-30
In Figure 4-26, select the PIP channel (channel P) to overlay temperature/humidity information.
Click overlay setup button, you can see the following interface. See Figure 4-28.
Check the preview or monitor mode and then click Save button.
Figure 4-31
Tips
z
In Figure 4-28, click Set button, you can set overlay position. You need to select channel P
(PIP) to overlay information.
z Preview means you can overlay temperature humidity information on local preview window.
Monitor means you can overly temperature humidity information on the record file so that
you can view it when playback.
b) Connect temperature humidity device to the NVR
Connect the A2 and Y2 cable at the rear panel of the NVR to the A (or “+”) cable of the
temperature humidity device.