IC Realtime 4 Channel Forensic Network Video Recorder User Manual

Page 70

Advertising
background image

61

Here you can set a multiple cast group. Please refer to the following sheet for detailed
information.
z

IP multiple cast group address

-224.0.0.0-239.255.255.255
-“D” address space

z

The higher four-bit of the first byte=”1110”

z

Reserved local multiple cast group address

-224.0.0.0-224.0.0.255
-TTL=1 When sending out telegraph
-For example
224.0.0.1 All

systems in the sub-net

224.0.0.2 All routers in the sub-net
224.0.0.4 DVMRP router
224.0.0.5 OSPF router
224.0.0.13 PIMv2 router
z

Administrative scoped addressees

-239.0.0.0-239.255.255.255
-Private address space

z

Like the single broadcast address of RFC1918

z

Can not be used in Internet transmission

z

Used for multiple cast broadcast in limited space.

Except the above mentioned addresses of special meaning, you can use other addresses. For
example:
Multiple cast IP: 235.8.8.36
Multiple cast PORT: 3666.
After you logged in the Web, the Web can automatically get multiple cast address and add it to
the multiple cast groups. You can enable real-time monitor function to view the view.
Please note multiple cast function applies to special series only.

4.2.5.5.5 Email
The email interface is shown as below. See Figure 4-68.
z

SMTP server: Please input your email SMTP server IP here.

z

Port: Please input corresponding SMTP port value here.

z

Anonymous: Check the box here to enable anonymous function. In this mode, you do not

need to input user name and password to login the SMTP server.

z

User name: Please input the user name to login the sender email box. You do not need to

set user name if you have enabled anonymous function.

z

Password: Please input the corresponding password here. You do not need to set password

if you have enabled anonymous function.

z

Sender: Please input sender email box here.

z

Title: Please input email subject here. System support English character and Arabic number.

Max 32-digit.

z

Attachment: Check the box here to enable attachment function.

z

Receiver: Please input receiver email address here. System max supports 3 email boxes.

z

Encrypt type: The option includes: NONE, SSL, TLS.

z

Interval: The send interval ranges from 0 to 3600 seconds. 0 means there is no interval.

Advertising