IC Realtime 4 Channel Forensic Network Video Recorder User Manual
Page 65
56
Figure 4-61
Playback or search in the redundant disk.
There are two ways for you to playback or search in the redundant disk.
z
Set redundant disk(s) as read-only disk or read-write disk (Main menu->Advanced->HDD
management). See Figure 4-61. System needs to reboot to get setup activated. Now you
can search or playback file in redundant disk.
z
Dismantle the disk and play it in another PC.
4.2.5.4 RS232
RS232 interface is shown as below. There are five items. See Figure 4-62.
z
Function: There are various devices for you to select. Console is for you to use the COM or
mini-end software to upgrade or debug the program. The control keyboard is for you to
control the device via the special keyboard. Transparent COM (adapter) is to connect to the
PC to transfer data directly. Protocol COM is for card overlay function. Network keyboard is
for you to use the special keyboard to control the device. PTZ matrix is to connect to the
peripheral matrix control.
z
Baud rate: You can select proper baud rate.
z
Data bit: You can select proper data bit. The value ranges from 5 to 8.
z
Stop bit: There are three values: 1/1.5/2.
z
Parity: there are five choices: none/odd/even/space/mark.
System default setup is:
z
Function:
Console
z
Baud
rate:115200
z
Data
bit:8
z
Stop
bit:1
z
Parity:
None
After completing all the setups please click save button, system goes back to the previous menu.