IC Realtime 4 Channel Forensic Network Video Recorder - Manual (Page 88)

79
4.2.7.4.3 Enable/disable record
Please check current channel status: “○” means it is not in recording status, “●” means it is in
recording status.
You can use mouse or direction key to highlight channel number. See Figure 4-100.
Figure 4-100
4.2.7.4.4 Enable all channel recording
Highlight ○ below All, you can enable all channel recording.
z
All channel schedule record
Please highlight “ALL” after “Schedule”. See Figure 4-101.
When system is in schedule recording, all channels will record as you have previously set
(Main menu->Setting->Schedule).
The corresponding indication light in front panel will turn on.
Figure 4-101
z All channel manual record
Please highlight “ALL” after “Manual.” See Figure 4-102.
When system is in manual recording, all scheduled set up you have set in will be null ((Main
menu->Setting->Schedule)).
You can see indication light in front panel turns on, system begins manual record now.
Figure 4-102