IC Realtime 4 Channel Forensic Network Video Recorder - Manual (Page 114)

105
Parameter Function
Color Setting Here you can set video brightness, contrastness, hue, saturation and
gain.
The value ranges from 0 to 100.Default value is 50. See Figure 5-27.
Please note, some series devices do not support OSD transparent
setup function.
Cover area
(privacy mask) z Here you can privacy mask the specified video in the monitor video.
z
One channel max supports 4 privacy mask zones.
z
The privacy mask includes two options: Never/monitor. Never: It
means do not enable privacy mask function. Monitor: the privacy
mask zone can not be viewed in monitor mode.
Time Title
z
You can enable this function so that system overlays time
information in video window.
z
You can use the mouse to drag the time tile position.
Channel Title z You can enable this function so that system overlays channel
information in video window.
z You can use the mouse to drag the channel tile position.
Save You can click save button after you complete setup for one channel, or
you can complete the whole setups and then click save button.
Refresh Click this button to get device latest configuration information.
Click copy interface, the interface is shown as in Figure 5-28.
If you have completed the setup for channel 1, you can click 3 to copy current setup to channel 3.
Or you can click 2, 3, and 4 to copy current setup to channel 2, channel 3 and channel 4.
Figure 5-28