Mopar K6860899 - Manual (Page 15)

6
33. Using crimping tool (1), Mopar® p/n 05019912AA or
equivalent, crimp the splice clip and wires together.
34. Repeat the previous two steps for the ground side
wires .
35. Solder (3) the connection (2) together using rosin core
solder (1).
36. Center the heat shrink tubing (2) over the solder joint
and heat using a heat gun. Heat the joint until the tub­
ing is tightly sealed and sealant (1) comes out of both
ends of the tubing.
FULL CENTER CONSOLE
Oct 16, 2009 K6860899 Rev. 1