Mopar K6860899 - Manual (Page 92)

1
WI­FI ROUTER
PT CRUISER
PROCEDURE STEPS:
NOTE: Using a test light, verify the cigarette lighter outlet being used is ignition switched. Power must not be
present with the ignition in the OFF position.
1. Disconnect and isolate the battery negative cable.
2. Remove the four screws located inside the storage
bin.
3. Remove the two screws located under the cup holder
lining.
4. Disconnect the electrical connectors.
5. Remove the center console from the vehicle.
6. Mount the Wi­Fi router bracket (1) under the passen­
ger seat with the provided materials.
7. Route and secure the Wi­Fi router harness under the
seat track along center console harness and cut the
Wi­Fi power harness to the proper length.
Oct 16, 2009 K6860899 Rev. 1
PRINT THIS VEHICLE INDEX