Mopar K6860899 - Manual (Page 90)

8
55. Position the seat backs (3) up and latch.
56. Install the belt buckles (1) and install the bolt (2).
57. Tighten the buckle bolt to 66 N∙m (49 ft. lbs.)
58. Install the bolts (4) and tighten to 80 N∙m (59 ft. lbs.)
59. Place the seat cushion into the vehicle and tuck the
rear of the cushion (1) up under the seat belt buckles
and rear seat back.
60. Lower the front of the cushion (3) down and install the
bolts (2).
61. Tighten the bolts to 80 N∙m (60 ft. lbs.).
62. Position the quarter trim tabs (3) into the appropriate
slots in the body and seat the trim (2) fully.
63. Install the cargo hook and retainer if necessary.
Oct 16, 2009 K6860899 Rev. 1