Mopar K6860899 User Manual
Page 87
Advertising
5
34. Place the strands of the power side wires overlapping
each other inside of the splice clip (1).
35. Using crimping tool (1), Mopar® p/n 05019912AA or
equivalent, crimp the splice clip and wires together.
36. Repeat the previous two steps for the ground side
wires.
37. Solder (3) the connection (2) together using rosin core
solder (1).
CAUTION: Do not use acid core solder.
Oct 16, 2009
K6860899 Rev. 1
Advertising