Mopar K6860899 - Manual (Page 80)

7
42. Install the quarter trim panel (1) to the inside of the ve­
hicle, carefully align and install the bottom of the quar­
ter trim panel slots into the load floor first. Continue to
seat the remaining clips on the panel, working from
the bottom up. Use hand pressure to seat the clips
(3).
43. Install the cargo tie downs and tighten the screw.
44. Install the load floor into its locked position.
45. Install the rear door scuff plate.
46. Install the C­pillar trim.
47. Install the load floor panel (1) to the load floor (2). In­
stall the rear seat bracket (3) using hand pressure to
seat the clips.
48. Install the Wi­Fi router (1) into the router bracket (2).
49. Return the rear seats in the upright position.
Oct 16, 2009 K6860899 Rev. 1