Mopar K6860899 - Manual (Page 18)

9
49. Route the seat belt (2) through the slot in the lower
C­pillar trim panel (1) and position the trim panel to
the C­pillar (4).
50. Engage the retaining tabs that secure the lower C­pil­
lar trim panel to the C­pillar.
51. Install the bolt (3) that secures the seat belt to the bot­
tom of the C­pillar. Tighten the bolt to 40 N∙m (30 ft.
lbs.).
52. Position the upper C­pillar trim panel (5) to the C­pillar
(4).
53. Engage the retaining tabs that secure the upper C­pil­
lar trim panel to the C­pillar.
54. Install the bolt (2) that secures the seat belt (3) to the
top of the C­pillar. Tighten the bolt to 40 N∙m (30 ft.
lbs.).
55. Install the cap (1) onto the seat belt.
56. Install the WiFi Router (2) into the mounted WiFi
Router cradle (1).
57. Connect the negative battery cable.
Oct 16, 2009 K6860899 Rev. 1