Mopar K6860899 - Manual (Page 76)

3
17. Fold down the rear seat.
18. Remove the load floor panel (1) from the load floor (2)
and the rear seat bracket (3).
19. Using trim stick C­4755 or equivalent, pry out the
screw cover from the top of the C­pillar trim panel (2),
remove the screw.
20. Remove the trim by sliding up and out of the quarter
trim molding.
21. Pull down at the center of the headliner molding (3),
only enough to allow the tab (2) to be released from
the quarter trim molding.
22. Carefully pull down to remove the remaining clips
(4) attaching the molding to the body, then move
the molding to the left to released the tab from the
quarter trim molding.
Oct 16, 2009 K6860899 Rev. 1