Mopar K6860899 - Manual (Page 22)

4
8. Splice the router power wire to the F981 (RD/BR) cir­
cuit using the directions below.
9. Cut each wire and remove 13 mm (0.5 in.) of insula­
tion from each wire that needs to be soldered/spliced.
10. Place a piece of supplied adhesive lined heat shrink
tubing on one side of each cut wire. Insure the tubing
will be long enough to cover and seal the entire sol­
dered area.
CAUTION: Do not use acid core solder.
11. Solder the supplied fused pigtail to Wi­Fi power har­
ness power wire.
12. Place the strands of the power side wires overlapping
each other inside of the splice clip (1).
13. Using crimping tool (1), Mopar® p/n 05019912AA or
equivalent, crimp the splice clip and wires together.
Feb 12, 2010 K6860899 Rev. 2