Mopar K6860899 - Manual (Page 55)

5
24. Using crimping tool (1), Mopar p/n 05019912AA or
equivalent, crimp the splice clip and wires together.
CAUTION: Do not use acid core solder.
25. Solder (3) the connection (2) together using rosin core
type solder (1) only.
26. Center the heat shrink tubing (2) over the joint and
heat using a heat gun. Heat the joint until the tubing is
tightly sealed and sealant (1) comes out of both ends
of the tubing.
Oct 16, 2009 K6860899 Rev. 1