Mopar K6860899 - Manual (Page 94)

3
15. Solder (3) the connection (2) together using rosin core
solder (1).
16. Center the heat shrink tubing (2) over the solder joint
and heat using a heat gun. Heat the joint until the tub­
ing is tightly sealed and sealant (1) comes out of both
ends of the tubing.
17. Position the center console into the vehicle.
18. Connect the electrical connectors.
19. Install the two screws in the cup holder.
20. Install the four screws in the storage bin.
Oct 16, 2009 K6860899 Rev. 1