Avaya C360 - Manual (Page 116)

Avaya C360 Layer 2 Features
116 Installation and Configuration Guide Avaya C360 Multilayer Stackable Switches, version 4.5
Set the auto negotiation mode of
a port set port negotiation
Administratively enable a port set port enable
Administratively disable a port set port disable
Set the speed for a 10/100 port set port speed
Configure the duplex mode of a
10/100BASE-T port set port duplex
Configure a name for a port set port name
Set the send/receive mode for
flow-control frames for a full
duplex port set port flowcontrol
Set the flow control
advertisement for a Gigabit port
when performing
autonegotiation set port
auto-negotiation-flowcontrol-advertisement
Set the priority level of a port set port level
Display settings and status for
all ports show port
Display per-port status
information related to flow
control show port flowcontrol
Display the flow control
advertisement for a Gigabit port
used to perform auto-negotiation show port
auto-negotiation-flowcontrol-advertisement
Display the CAM table entries
for a specific port show cam
Display the CAM table entries
for a specific MAC address show cam mac
Clear all the CAM table entries. clear cam
Display the autopartition settings show autopartition
Table 30: Ethernet Configuration CLI Commands 2 of 3
In order to... Use the following command...
2 of 3