Avaya C360 - Manual (Page 126)

Avaya C360 Layer 2 Features
126 Installation and Configuration Guide Avaya C360 Multilayer Stackable Switches, version 4.5
Display all the port dot1x
statistics show port dot1x statistics
Set the minimal idle time
between authentication attempts set dot1x quiet-period
Set the time interval between
attempts to access the
Authenticated Station set dot1x tx-period
Set the server retransmission
timeout period for all ports set dot1x server-timeout
Set the authentication period (an
idle time between
re-authentication attempts) set dot1x re-authperiod
Set the
authenticator-to-supplicant
retransmission timeout period
(the time for the switch to wait
for a reply from the
Authenticated Station) set dot1x supp-timeout
Set the max-req for all ports (the
maximal number of times the
port
tries to retransmit requests to
the Authenticated Station before
the session is terminated) set dot1x max-req
Globally enable/disable 802.1x set dot1x system-auth-control
enable/disable
Set dot1x control parameter per
port set port dot1x port-control
Initialize port dot1x set port dot1x initialize
Set the port to re-authenticate set port dot1x re-authenticate
Set dot1x re-authentication
mode per port set port dot1x re-authentication
Set the 802.1x quiet period per
port set port dot1x quiet-period
Set the transmit period per port
(a time interval between
attempts to access the
Authenticated Station) set port dot1x tx-period
In order to... Use the following command...
2 of 3