Avaya C360 - Manual (Page 122)

Avaya C360 Layer 2 Features
122 Installation and Configuration Guide Avaya C360 Multilayer Stackable Switches, version 4.5
Table 31 shows the relationship between the binding mode and the whether the packet is
accepted.
VLAN CLI Commands
The following table contains a list of the CLI commands for the VLAN feature. The rules of
syntax and output examples are all set out in detail in the Reference Guide for the Avaya C360
Converged Stackable Switch, 10-300506.
Table 31: Ingress VLAN Security
Binding Mode Packets Permitted
Static Only user-defined VIDs
Bind to Configured All VIDs defined in the switch
Bind to All Any VID (1 to 3,071)
Table 32: VLAN CLI Commands 1 of 2
In order to... Use the following command...
Assign the Port VLAN ID (PVID) set port vlan
Define the port binding method set port vlan-binding-mode
Define a static VLAN for a port set port static-vlan
Configure the tagging mode of a
port set trunk
Create VLANs set vlan
Display the port VLAN binding
mode settings show port vlan-binding-mode
Display VLAN tagging
information of the ports, port
binding mode, port VLAN ID and
the allowed VLANs on a port show trunk
Display the VLANs configured in
the switch. show vlan
Clear VLAN entries clear vlan
1 of 2