Avaya C360 - Manual (Page 133)

MAC Security
Issue 1 July 2006 133
currently learnt on this port are preserved and considered as secure MAC, unless they are
removed using clear secure mac command. Individual secure MACs can also be added.
Tip:
Tip:
You can add a MAC address to more than one port on the device. This allows a
specific device to communicate with the switch via more than one ingress port.
However the number of secured MAC addresses on any module cannot exceed
1,024.
Note:
Note:
Ports that are members of a port redundancy scheme should not be also
configured as secure ports.
MAC Security CLI Commands
The following table contains a list of CLI commands for the MAC Security feature. The rules of
syntax and output examples are all set out in detail in the Reference Guide for the Avaya C360
Converged Stackable Switch, 10-300506.
In order to... Use the following
command...
Enable/Disable MAC security for
the switch set security mode
Display the MAC security mode
for the switch show security mode
Enable/Disable MAC security for
a specific port set port security
Display the MAC security mode
for a port show port security
Specify the action taken when
there is a security violation set security violation action
Add a MAC address to a port's
list of allowed MAC addresses set secure mac
Remove a MAC address from a
port's list of allowed MAC
addresses clear secure mac
Display a port's list of allowed
MAC addresses show secure mac