Avaya C360 - Manual (Page 138)

Avaya C360 Layer 2 Features
138 Installation and Configuration Guide Avaya C360 Multilayer Stackable Switches, version 4.5
Tip:
Tip:
Intermodule Port Redundancy does not interwork with the Spanning Tree
Algorithm.
Port Redundancy CLI Commands
The following table contains a list of the CLI commands for the Redundancy feature. The rules
of syntax and output examples are all set out in detail in the Reference Guide for the Avaya
C360 Converged Stackable Switch, 10-300506.
In order to... Use the following command...
Define or remove port
redundancy schemes set port redundancy
Enable the defined port
redundancy schemes set port redundancy enable
Disable the defined port
redundancy schemes set port redundancy disable
Define the timers that control the
port redundancy operation set port redundancy-interval
Display information on port
redundancy schemes. show port redundancy
Define the switch's unique
intermodule redundancy
scheme set intermodule port redundancy
Clear the intermodule
redundancy set intermodule port redundancy
off
display the intermodule
redundancy entry defined for the
switch show intermodule port
redundancy