Avaya C360 - Manual (Page 32)

Avaya C360 Front and Rear Panels
32 Installation and Configuration Guide Avaya C360 Multilayer Stackable Switches, version 4.5
The following Function LEDs apply to all ports
LNK Port Status OFF - Port is disabled
ON - Link is OK
Blinking - Port is enabled, but Link is down
COL Collision OFF - No collision or full-duplex port for ports 1 to
24/48; always OFF for ports 51 to 52.
ON - Collision occurred on line.
Tx Transmit to line OFF - No transmit activity
ON - Data transmitted on line from the module
Rx Receive from
line OFF - No receive activity
ON - Data received from the line into the module
FDX Full Duplex
mode OFF - Half duplex mode (ports 1 to 24/48)
ON - Full duplex mode (ports 1 to 24/48)
Always ON for ports 51,52 (full-duplex mode
only)
Hspd High Speed Ports 1-24/48 Ports 51,52
OFF: 10 Mbps N/A
ON: 100 Mbps 1000 Mbps
LAG Link
Aggregation
Group
(Trunking) OFF - No LAG defined for this port
ON - Port belongs to a LAG
Table 3: C360 Function LED Descriptions 2 of 3
LED
Name Description LED Status
2 of 3