Avaya C360 - Manual (Page 180)

Avaya C360 Layer 3 Features
180 Installation and Configuration Guide Avaya C360 Multilayer Stackable Switches, version 4.5
Policy Configuration
Policy Configuration Overview
The C360 supports QoS (Quality of Service) by using multiple priority levels and IEEE 802.1p
priority tagging to ensure that data and voice receive the necessary levels of service.
The C360 can enforce QoS policy on routed packets and change their 802.1p priority, according
to the following criteria:
Set the virtual router
advertisement timer value (in
seconds) for the virtual router ID ip vrrp timer
Set the virtual router priority
value used when selecting a
master route ip vrrp priority
Set or disable the virtual router
simple password authentication
for the virtual router ID. ip vrrp auth-key
Configure or disable the router
to preempt a lower priority
master for the virtual router ID ip vrrp preempt
Set the primary address that
shall be used as the source
address of VRRP packets for
the virtual router ID ip vrrp primary
Accept or discard packets
addressed to the IP address(es)
associated with the virtual
router, such as ICMP, SNMP,
and TELNET (if it is not the IP
address owner) ip vrrp override addr owner
Display VRRP information show ip vrrp
Display full VRRP-related
information show ip vrrp detail
In order to... Use the following command...
2 of 2